Mesa/Boogie OOGIEBMESA Owner's Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
PAGE 14
REVERB:
The LONE STAR incorporates a stunning analog Reverb circuit that istted with individual Channel Mix controls and a unique
Reverb Voicing feature that offers a choice between two classic reverb sounds.
REVERB BRIGHT produces a vintage guitar amp style brighter sound filled with canyons of har-
monics and the classic spring resonance, while REV WARM features a smoother, warmer character
often associated with large plate studio reverbs. You will quickly see why we think the LONE STAR
Reverb is possibly our best reverb to date. Enjoy!
CHANNEL & SOLO: External Switch Ports:
These two 1/4 jacks provide an interface for remote control of the Channel Select function
as well as activation of the SOLO control. These jacks may be connected to an external control unit that stores a grounding logic switch function
under a midi program number, thereby removing the need to use the included LONE STAR Footswitch in
larger stage rigs.
The EXTERNAL SWITCH jacks respond to any tip-to-ground latching type logic for their triggering. This
type of switching logic can be found on most midi master control switching units on the market.
BIAS SELECT:
This mini toggle allows for proper biasing when swapping to EL34 type power tubes for a brighter harmonic laden response.
It selects a different set of bias resistors and insures that these extremely different power tubes will sound better and work much more reliably.
The adjacent LED indicator alerts you that the bias has been set to accommodate the EL34s.
NOTE: It is extremely important that the BIAS SWITCH setting match the type of tubes in use. Failure to comply will result in damage to your
amplifier. Always check the BIAS SWITCH whenever swapping tubes!
If you are doing mostly cleaner rhythm style playing and go for a warmer fatter lead solo voice as well as need a
variety of sounds, you will likely prefer the stock compliment of 6L6s. They clip in a warmer way and during our R &
D process we found them to produce the best blend of frequencies with the least compromise stylistically.
There are however, some wonderful clipped power sounds available for both chording and single note work with the
right set of EL34’s fitted. Aficionados of this sound have long recognized that nothing produces the layers of soft,
lined-up harmonics like these British style bottles and when dialed right, the LONE STAR takes on a whole new
personality. So when you have finished exploring this side of the Atlantic for vintage magic, denitely take a jump
across the pond and check out some of the amazing sounds that are made possible with the inclusion of the BIAS SELECT feature and these
opposite sounding tube types.
We recommend the 6L6 for reliability: In our many tests and continued use of the currently available EL34 type power tubes on the market
today, we regret to say that they do not appear to be as rugged in construction or as reliable as their 6L6 counterparts. This fact, along with their
sonic narrowing of possible styles, is why the LONE STAR ships with 6L6 power tubes.
If you nd that your signature sound relies on using EL34 power tubes, then we strongly suggest keeping at least one spare set of tubes and a
bag of extra fuses with you at all times when performing in the event of a tube failure. A little preparation will save you a lot of frustration should
one of these less rugged tubes fail.
NOTE: Using the AC POWER switch set to TWEED will reduce the strain on EL34 tubes (and 6L6 as well). If you prefer the sound of this set-
ting, you will reduce the likelihood of tube problems and greatly extend their toneful life, as they are basically coasting.
REAR PANEL:
(Continued)
LOOP
IN
HARD BYPASS
OOGIE
B
M
ESA
LONE STAR
CH 2 REVERB CH 1
REVERB
BRIGHT
REV WARM
ALL - TUBE
AMPLIFIER
REVERB
BRIGHT
REV WARM
ALL - TUBE
AMPLIFIER
CHANNEL
SOLO
EXT
SW
SLAVE
SPEAKERS
HAND BUILT IN PETALUMA CA.
8 OHM 4 OHM 4 OHM
BIAS SELECT
EL-34
WHEN
RED ON
EL-34
6L6
CAUTION: SWITCH MUST
MATCH TUBES IN USE
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments