Mesa/Boogie OOGIEBMESA Owner's Manual download pdf (Page 26)

PAG E 22

BIAS ADJUSTMENT: (Continued) Again, this has some merit .. but it’s still not as good as using tubes that are matched in the first place

because compensating for the mis-match causes the push-pull circuit itself to become unbalanced. Two wrongs don’t really make a

right.

Some of the other recommended biasing, “methods” — such as -”.. tubes running red hot, increase the bias .. sounds harsh and runs too

cool, turn it down ...” are guesswork at best. Luckily, one of the great things about tube amps is that they can usually stand some abuse

without causing any real harm ... at least not immediately. But don’t these alterations imply that you are second-guessing the amp designer

and that there’s a better set of operating conditions that the designer missed but the tube sellers have discovered?

Now some players may like the sound of their amp altered by tubes with extreme characteristics and with the bias set to help compensate.

But often it is the mere novelty of change that they’re really responding to and when the amp goes back to the proper original way, we’ve

seen them be far happier still!

Because every part in every one of our designs has been meticulously evaluated, compared and stressed over — no matter how seem-

ingly insignificant it might be. And with every design we look for a “sweet spot” where all the parameters — including the bias — come

together to give the best sonic performance, consistently and reliably. Every part and voltage is important — yet no one complains that

these other parameters aren’t available for tinkering.

Consider our patented

Simul-Class

circuitry where there are two different bias voltages used for separate pairs of power tubes ... and

changing one voltage also changes the other. Great care goes into getting this just right and we think we’d be asking for trouble to have

it adjustable for the world to play with ... unless you like paying to have your amp messed up. Sorry, I meant to say, “Uh, ... your amp

needed biasing.”

If that doesn’t appeal to you, then merely plug a matched set of

Mesa

tubes into one of our amps and you’re ready for tone. Guaranteed.

You’d be amazed at the number of service calls we field every day that lead to a diagnosis of out-of-tolerance, non-spec tube problems. To

think these would be prevented by including a bias adjustment is something of an insult to you and us. If you put the wrong size tires on

your car, do you think changing the pressure will make them right?

Please, don’t think this is a blanket indictment of the other guys selling tubes — it isn’t. And their tubes aren’t all bad either. It just doesn’t

make sense to pay more of your hard earned cash for tubes that were probably made in the same Russian or Chinese factory and which

have the possibility of being outside the performance window we select for your amp. And it pains us to hear the hype and mystique built

up around biasing when twenty-five years of evidence affirms our decision to make bias circuits that “never need adjustment”. How much

money and trouble that has saved

Mesa/Boogie

players you couldn’t estimate.

Our rigorously tested and hand selected tubes are available at your nearest

Mesa/Boogie

Pro Center or from us directly. Nobody offers

better price, quality or warranty than we do ... so why swerve?

Next time we’ll talk about our part in developing the great Sylvania STR 415 type 6 6 and how we’re on the verge of seeing something fairly

close reappear on the market. Remember, we still have some of these super rugged mondo-bottles available for older amps —

Boogies

only please! Until then, Relax, Breathe and Nourish your soul!

Cheers!

Mesa/Boogie Ltd.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Comments to this Manuals

No comments

Mesa/Boogie OOGIEBMESA Owner's Manual Page 26

Comments to this Manuals