Mesa/Boogie TriAxis Owner's Manual download pdf (Page 29)

PAGE 25

VALUES OF CHANGE: SUB-ROUTINE (Continued)

STEP 2:

Assign a Value. Start with the ﬁrst parameter that you assigned a controller to, “TRUST US ON THIS ONE”. Press either

the left or right arrowed keys under this parameter. It will start to ﬂash! Now Use the keys under the Program/Channel window to

Decrease or Increase the parameter’s maximum modulated VALUE.

STEP 3:

Press the ENTR key one time. The parameter you are assigning a VALUE to will stop ﬂashing momentarily and the

VALUE displayed in the PROGRAM WINDOW will be assigned to this ﬂashing parameter in this PRESET only.

STEP 4:

REPEAT: Do NOT press the SHIFT key again. Each time you assign a “VALUE” make sure that when you press the

ENTR key the parameter display stops ﬂashing momentarily. Always check this!!! Save yourself time. If you are unsure, simply

press the ENTR key again.

STEP 5:

EXIT and RETURN to normal “Parameter Routine”: After assigning all parameters that you wish to modulate with

a Controller number, a VALUE, you are now ready to EXIT the VALUE SUB-ROUTINE and check your work. Press the EXIT key

one time to Return to the normal Parameter routine. NOTICE FLASHING HAS STOPPED. With an expression pedal connected to a

conversion device, you will now be able to modulate parameters on your ﬁrst preset. Drive your rig!

NOTE: If the pedal works backwards, unplug it , back the pedal off and plug it back in...this recalibrates the conversion device and

software interface.

BASS

MIDDLETREBLEGAINPROGRAM/CHANNELPRESET

PGM

/CH

COPY

01 23 45

FLASH

NOTICE that the display STOPS

flashing while you are holding

the program keys.

NOTICE that in this example, we pressed the up key and

have choosen the maximum amount of modulation in the

positive direction...when the control pedal is pressed this

parameter would go to a setting of 10

BASS

MIDDLETREBLEGAINPROGRAM/CHANNELPRESET

PGM

/CH

COPY

ENTR

01 23 45

FLASH

PRESS ONCE (read paragraph)

WATCH FOR MOMENTARY

PAUSE OF FLASHING IN THE

DISPLAY WINDOW

BASS

MIDDLETREBLEGAINPROGRAM/CHANNELPRESET

PGM

/CH

COPY

ENTR

EXIT

345

FLASH

PRESS ONCE ONLY

NOTICE FLASHING

HAS STOPPED.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Comments to this Manuals

No comments

Mesa/Boogie TriAxis Owner's Manual Page 29

Comments to this Manuals

Related products and manuals for Supplementary music equipment Mesa/Boogie TriAxis