search

Mesa/Boogie TriAxis Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 9
PAGE 6
OFF
IN
MIDI
THRU OUT
ON/LIFT
ON GROUND
MIDI
THRU OUT
OFF
IN
ON/LIFT
ON GROUND
OFF
IN
MIDI
THRU
OUT
ON/LIFT
ON GROUND
1
2
SWITCH
4
3
1
2
SWITCH
4
3
RECORD
REAR PANEL:
PHANTOM POWER:
The coax power jack above the A.C. line cord can provide power to a Midi foot controller, through the 7 pin Midi
IN jack. This is accomplished by connecting an external A.C. to D.C. power
adapter of correct voltage and polarity for whatever type of foot controller
you are using to the coax jack on the rear panel of TriAxis.
The MESA/Boogie Abacus foot controller requires the following power
requirements: 12 Volts @ 500 ma, Tip = Ground and Sleeve = Positive.
Connect a 7-pin DIN cable between the Midi In jack on the TriAxis and the
Midi Out jack on the foot controller. This negates the need for a clumsy power adaptor on the stage.
NOTE: 7 -Pin DIN cable will not fit into 5-Pin DIN jacks. Check to see that your foot controller accepts 7-Pin DIN cables and is wired
to accept Power in this manner...and of the proper voltage match to TriAxis’ phantom power output.
MIDI IN, THRU, AND OUT JACKS:
TriAxis provides the standard “Midi Interface” via these three jacks. Connect the 7-Pin DIN to
the Abacus or similar foot controller. Then connect the next device’s Midi
In jack to TriAxis Midi THRU jack.
TriAxis’ Midi “THRU” and Midi OUT jacks mirror all incoming Midi mes-
sages. The “THRU” jack will not send Data Dump or other similar command
information. Use the Midi “OUT” for all such commands. The “OUT” also
sends Midi program change messages when the Program keys are used
on TriAxis’ Front Panel.
SWITCH:
Switch Jacks 1 through 4 provide “Tip to Ground” function switches for controlling or activating external devices such
as the “Switch-Track” voicing features that are incorporated into MESA/Boogie Switch Track power amplifiers. They will also control
many, but not all, Bypass, Hold, Mute etc. func-
tion jacks found on many Non-MESA products
that do not use momentary logic. If they do not
control a device that you own, we suggest calling
that devices manufacture for specific voltage re-
quirements, as TriAxis may not provide “ground”
needed to control the particular device.
RECORD:
These jacks provide direct stereo interfacing to recording or live mixing consoles. They faithfully reproduce both lead
and rhythm sounds similar to those you are accustomed to hearing from your power amp
and speakers. The output level is determined by the front panel programmable MASTER
control setting. At extreme settings it may be possible to overload the console’s input
circuit. Medium Master control settings are probably sufficient for most situations. Check
your levels.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Comments to this Manuals

No comments
Related products and manuals for Supplementary music equipment Mesa/Boogie TriAxis
Supplementary music equipment Mesa/Boogie Roadster Owner's Manual   (44 pages)
Supplementary music equipment Mesa/Boogie TransAtlantic TA-15 Owner's Manual   (38 pages)
Supplementary music equipment Mesa/Boogie Mark Five Owner's Manual   (30 pages)
Supplementary music equipment Mesa/Boogie Boogie Owner's Manual   (38 pages)
Supplementary music equipment Mesa/Boogie V-TWIN Specifications   (17 pages)
Supplementary music equipment Mesa/Boogie OOGIEBMESA Owner's Manual   (13 pages)
  • Intel Astracast Fonegear Altech UEC Durst
  • Kapsys Mobile phones Essick Air Barbecues & grills Cal Flame Barbecues & grills Pyramat Serial switch boxes Bosch Rack accessories
  • Mercedes Benz 2006 S 350 HP ProLiant ML150 Canon imageRUNNER ADVANCE C5255 Samsung 930MP Canon IXUS 310 HS
  • Hp ProBook 6555b Notebook-PC User Manual Canon PIXMA MX494 User Manual Canon PIXMA MG3550 User Manual EnGenius EOC-3220 PLUS Datasheet Brother BM-3600 Datasheet